Posts by Călin Vamoş

[1] Adams, jr. C.M., Thermal Consideration in Freezing,  Liquid Metals and Solidifcation, published by ASM, 1957, pp. 187-217.
[2] Adams, D.E., J. Inst. Metals, 1948, no. 75:809
[3] Adenis, D.J.P., Coats, K.H., Ragone, D.V., An analysis of the Direct-Chill-Casting Process by Numerical Methods, J. Inst. Metals, 91, 1961-63, pp. 395-403.
[4] Bach, P., Hassager, O., Hassager, O.,  An algorithm for use of the lagrangian application in newtonian fluid mechanics and application to free-surface flow,  Fluid Mech., vol. 152, 1985, pp. 173-190.
[5] Beech, J., Jones, H., Proceedings of the 4th Decennial International Conference on Solidification Processing,  Ranmoor House, University of Scheffield, 7-10 July, 1997.
[6] Bishop, H.F., Pellini, W.S., Solidification of Metals,  The Foundry, 80, 1952, p. 86.
[7] Beohmer, J.R., Fett, F.N., Funk, G., Analysis of high-temperature behaviour of solidified material within a continuous casting machine,  Comut. Struct. vol. 47
[8] Braszczynski, J., Teoria procesow adlewniczycg,  Panstwowe Wydawnictwo Naukowe, Warszawa, 1989.
[9] Bratu, C., Popa, I., Determinarea proprietăților termofizice ale amestecurilor de formare prin simularea numerică a procesului de solidificare, Turnarea și Solidificarea Metalelor și Aliajelor, Tome, 1, no. 1, 1998, Editura U.T. Pres. ISSN 1453-9756, pp. 19-24.
[10] Bratu, C., Popa, I., Toma, G.,  Cercetări privind dirijarea procesului de solidificare a rotorilor turnați din oțel inoxidabil, Turnarea și Solidificarea Metalelor și Aliajelor, Tome 1, no.1, 1998, Editura U.T. Pres. ISSN, 1453-9756, pp. 25-30.
[11] Briggs, C.W., Gezelius, R.W.,  Studies on Solidification and Contraction in Stell Castings, Trans. AFS, 43, 1935, p. 274.
[12] Brody, H.D., Flemings, .C.,  Solute Redistribution in Dendritic Solidification, Trans. AIME, 236, 1966, pp. 624-634.
[13] Campbell, J., Castings, Butterworth-Heinemann Ltd, 1991.
[14] Carslaw, H.S., Jaeger, J.C., Conduction of Heat in Solids, Oxford, 1947.
[15] Celenatano, D., Oller, S., Onate, E., A finite element for Thermomechanical analysis in casting processes,  Journal de Physique, Vol. 3, pp. 1173-1180.
[16] Chen, C.W., Chon, H.Y., Li, C.R., Shei, C.T., Hwang, W.S.,  Comparation of  different computational fluid dynamics techniques on their applications to the  modeling of mold
filling in casting,  Trans. Japan Foundrymen’s soc., vol. 12, 1993, pp. 94-106.
[17] Cheng, L., Armfield, S.,  A simplified marker and cell method for unsteady flows on non-staggered grids,  Int. J. Metj. Fluids, Vol. 21, 1995, pp. 15-34.
[18] Chenont, J.L., Bellet, M.,  The ALE method for the numerical simulation of material forming processes. Simulation of Materials Processing: Theory, Method and Application, Numiform’s95, ed. Shen, S.F., Dawson, P.R., A.A. Balkema, pp. 39-48, 1995.
[19] Chipman, J., Fondersmith, C.R.,  Rate of Solidification in Rimming Ingots, Trans. AIME, 125, 1937, p.370.
[20] Chvorinov, N., Control of the Solidification of Castings by Calculation, Giesserei, 27 (1940), p. 177, p. 201, p. 222.
[21] Ciobanu, I., Munteanu, S., Crișan, A., Studiu privind simularea pe calculator a distanței dintre piese în forma de turnare asupra răcirii și macrosolidificării,  Turnarea și Solidificarea Metalelor și Aliajelor, Tome 1, no. 1, 1998, Editura U.T. Pres, ISSN 1453-9756, pp. 45-56.
[22] Crișan, A., Ciobanu, I.,  Aspecte privind modelarea germinării eterogene a graficului în fonte, Turnarea și Solidificarea Metalelor și Aliajelor, Tome 1, no.1, 1998, Editura U.T. Pres, ISSN 1453-9756, pp. 65-68.
[23] Cross, M., Campbel, J., (eds.),  Modeling of Casintg, Welding and Advanced Solidification Processes – VII, Warrendale, PA, 1995, A Publication of TMS, Printed in USA.
[24] Cross, M., Tryer, Y.D., Bailey, C., Chow, P.,  Predicting macro porosity in shape castings using an integrated volume control unstructured mesh framework, Proc. Of 6 th Int. Conf. On Modelling of casting and Welding Processes, TMS, 1993, pp. 585-592.
[25] Dantzig, J.A., Applciation of Mathematical Models in Solidification, Proceedings Julian Syekely Symposium on Materials Processing, TMS, Warrendale, PA, 1997, pp. 411-422.
[26] Devaux, M.H., Traite pratique de masselottage des pieces moulees en sable, Editions Techniques de Industries de Fonderie,  Paris, 1984, pp. 15-16, ISBN 2-7119-0092-4.
[27] Dhatt, G., Touzot, G.,  Une presentation de la methode des elements finis, Editeur Malaine S.A., Collection Universite de Compiegne, 1984.
[28] Droux, J.J., Simulation numerique bidimensionnelle et tridimensionnelle de processus de solidification,  These No.901, Ecole Polytechnique Federale de Lausanne, 1991.
[29] Durand, F.,  Solidification des Aliages du Procede a la microstructure, Ecole d’ete Carry-le-Rouet, Les Editions de Physique, 1984.
[30] Economopoulos, M.,  Determination theorique des lois de refroidissement de pieces d’acier au cours d’un traitement thermique,  Revue de Metallurgie, novembre 1964, pp. 963-979.
[31] Fjaer, H.G., Mo, A.,  A mathematical Model for Thermal Stresse in Direct Chill Casting of Aluminium Billets, Metallurgical Transactions B, Vol. 21B, pp. 1049-1061.
[32] Flemings, M.C., Mehrabian, R., Nereo, G.E., Macrosegregation: Part II, Trans. AIME, 242, 1968, pp. 41-49.
[33] Flemings, M.C., Nereo, G.E.,  Macrosegregation: Part.I, Trans. AIME, 239, 1967, pp. 1449-1461.
[34] Flemings, M.C., Nereo, G.E.,  Macrosegregation: Part. III, Trans. AIME, 242, 1968, pp. 50-55.
[35] Fortin, M., Old and new finite elements for incompressible flows,  Int. J. Num. Meth. Fluids, Vol. I, 1981, pp. 347-364.
[36] Fredriksson, H.,  State of the Art of Computer Simulation of Casting and Solidification Processes, Les Editions de Physique, 1986.
[37] Gaston, L., Simulation numerique par elements finis bidimensionnels du remplissage de moules de fonderie et etude experimentale sur maquette hydraulique,  Ecole Nationale Superieure des Mines de Paris, 1997.
[38] Gidfriud, H., Simulation Processes: Computer Simulation and Modelling, Workshop 50 th Int. Foundry Congress 1983, Cairo, CIATF.
[39] Graaf, G., Akker, H.E.A.,  Piv measurements on flow phenomena during mould  filling, Optical Methods and Data Processing in Heat and Fluid, Seminar papers Mech E, pp. 249-253, 1994.
[40] Grill, A., Brimacombe, J.K., Weinberg, F.,  Mathematical analysis of stress in continuous casting of stell, Ironmaking, Vol. 1, pp. 38-47.
[41] Guan, J., Sham, P.R., Numerical Investigation of Thermal Stresses in Real  3D Structural Casting, Giesserei, Vol. 8, 1992, pp. 318-322.
[42] Halbart, G., Theorie mathematique de la fonderie,  H. Vaillant-Carmanne, Liege, 1945.
[43] Hansen, P., Hansen, L.F., Hattel, J., Analysis of thermal induced stress in die casting using o novel control volume FMD – technique, Proc. Of 6 th Int. Conf. On Modelling of casting and Welding Processes, TMS, 1993, pp. 565-572.
[44] Harlow, F.H., Welch, J.E., Numerical calculation of time-dependent viscous incompressible flow on fluid free surface,  Phys. Fluids, vol. 8, 1965, pp. 1282-2189.
[45] Henry, S., Etude de la germination et de la croissance m aclees dans les alliages d’aluminium. These No.1943, Ecole Polytechnique Federale de Lausanne, 1999.
[46] Henzel, J.G., Keverian, J., Comparison of Calculed and Measured Solidification Patterns in a Variety of  Steel Castings,  Trans. AFS, 65, 1964, pp. 661-677.
[47] Hirt, C.W., Nicholss, B.D., Volume of Fluid (VOF) method for the dynamics of fress boundaries, J. Comp. Phys., Vol. 39, 1991, pp. 201-225.
[48] Hong, C.P., Umeda, T., Kimura, Y., Met. Trans. 15B, 1984, 91, 101.
[49] Inone, T., Ju, D.Y.,  Simulation of Solidification and Viscoplastic Stresses  during Vertical Semi-Continuous Direct Chill Casting of Aluminium Alloy, Int. J. of Plasticity, Vol. 8, pp. 161-183.
[50] Ivănescu, A., Ciocan, A., Modelarea curgerii topiturilor metalice în procesul de turnare, Turnarea și Solidificarea Metalelor și aliajelor, Tome 1, art. 1, 1998, Editura U.T. Pres, ISSN 1453-9756, pp. 95-100.
[51] Ivănescu, A., Ciocan, A.,  Modelarea procesului de fierbere și solidificare a oțelului calmat, Turnarea și Solidificarea Metalelor și Aliajelor, Tome 1, nr. 1, 1998, Editura U.T. Pres. ISSN 1453-9756, pp. 183-187.
[52] Kamara, A., Contribution a la modelisation par elements finis des ecoulements turbulents. Applicaiton au remplissage en fonderie, Ecole Nationale Superieure des Minis de Paris, 1994.
[53] Kirkaldy, J.S., Youdelis, W.V., Trans. AIME, 1958, no. 212Ș833.
[54] Kleemola, H., Pithan, K., Advanced Casting and Solidification technology, 1994, COST 504 Conference, Espoo (Finalnd), September 12-13, 1994, European Cooperation in the Field of Science and Technical Research. Directorate Generale Science, Researc h and Development.
[55] Kurz, W., Fischer, D.J.,  Fundamentals of solidification, trans echn publications, 1989, Switzerland-Germany-UK-USA.
[56] Lacoste, E., Modelisation numeriqque de l’ecoulement d’un metal liquide a tranvers une preforme fibreuse pour l’eliberation de materiaux composites a matric metallique,
Universite Bordeaux I, 1992.
[57] Launder, B.E., Spalding, D.B.,  Lectures in Mathematical Models of Turbulence, Academic Press Inc., London, 1979.|
[58] Lewis, R.W., Huang, H.C., Usmani, A.S., Tadayon, M.R., Solidification in castings by finite element method,  Materials Science and Technology, Vol. 6, 1990, pp. 484-489.
[59] Li Jiarong, Liu Baichen, Xiang Huabing, Tong Hanjing,  Study of Formation and prediction Shrinkage cavity and Porosity of S.G. Iron Casting.
[60] Lightfoot, A.M.H., The Solidification of Molten Steel, Proceedings, London Mathematical Society, 31, 1930, p.97.
[61] Longa, W., Krzepniecie odlewow,  Katowice, Wzdawnictwo Slask, 1991.
[62] Marburg, E.,  Accelerated Solidification in Ingots: Its Difference on Ingot Soundness,  Trans. AIME, 97, 1953, pp. 152-172 si pp. 1553-1556.
[63] Marcus, S., Moduri de gândire, Editura Științifică și Enciclopedică, București, 1987, pp. 25-26.
[64] Markatos, N.C.,  Computational fluid flow capabilities and software, Ironmaking and Steelmaking, 1989, Vol. 16, no.4, London, U.K.
[65] Mehrabian, R., Keane, M., Flemings, M.C., Interdendritic Fluid Flow and Macrosegregation: Influence of Gravity,  Metall. Trans., 1, 1970, pp. 1209-1220.
[66] Menai, M.,  Simulation numerique tridimensionnelle du refroidissement des pieces en fonderie. Approach thermomecanique. Ecole Nationale Superieure des Mines de Paris, 1995.
[67] Michael, A.B., Bever., Trans. AIME, 200, 1954, p.47.
[68] Moitra, A., Thomas, B.G., Storkman, W.,  Thermo-Mechanical Model of Stell Shell Behavioir in the Continuous Casting Mold,  Proc. EPD Congress 1992, TMS, pp. 547-577.
[69] Monin, A.S., Yaglom, A.M.,  Statistical Fluid Mechanics, The MIT Press, 1971.
[70] Morgan, K., Lewis, A.M., Zienkiewicz, O.C., An improved algorithm for heat conduction problems with phase change, Int. J. in Eng. Meth. Vol. 12, 1978, pp. 1191-1195.
[71] Namur, R., Calcul generalise des modules de refroidissement par la methode de la couche uniforme limite,  Le Fonderie Belge, 6 juin 1956, pp. 89-122.
[72] Nelson, L.H.,  Solidification of Steel in Ingot Molds, Trans. ASM, 22, 1934, p. 193.
[73] Newmark, N.M.,  A method of computation of structural dynamics, ASCE, J. pf Engng. Mech. Divition, Vol. 85, 1959, pp. 67-94.
[74] Ohnaka, I.,  Directe finite difference method, Inovative Numerical Analysis for the Applied Enggineering Science.  Univ. Press. of Virginia, 1980.
[75] Ohnaka, I., Stefanescu, D.M.,  Proceedings of the International Symposia on Advanced Materials and Technology Solidification Science and Processing,  Hawaii, December 13-15, 1995, A Publication of TMS, Printed in USA.
[76] Ohtsuka, Y., Ono, T., Misuno, K., Matsubara, N.,  Computer simulation system of molten metal flow in diecasting, 57 th World Foundry Congress, Osaka, 23-28 September 1990.
[77] Paschkis, V., Trans, AFS, 53, 1945, pp. 62-61.
[78] Patankar, S.V., Numerical Heat Transfer and Fluid Flow, Taylor & Francis, 1998.
[79] Piwonka, T., Voller, V., Katgerman, L., (eds.), Modeling of Casting, Welding and Advanced Solidification Processes – VI, Palm Coast, Florida, March 21-26, 1993, A Publication of TMS, Printed in USA.
[80] Răduță, A., Crainic, N., Cercetări privind structura benzilor metalise Fe-Ni-P obținute prin răcire rapidă în toputură. Turnarea și Solidificarea Metalelor și Aliajelor, Tome 1, nr.1, 1998, Editura U.T. Pres. ISSN 1453-9756, pp. 137-142.
[81] Ragone, D.V., Adams, C.M., Taylor, H.F., Trans. AFS, 64, 1956, p. 640.
[82] Rappaz, M., Ozgu, M.R., Mahin, K.W., (eds.),  Modeling of Casting, Welding and Advanced Solidification Processes – V, Davos, Switzerland, September 16-21, 1990, A Publication of TMS, Printed in USA.
[83] Ribeiro, J.M., Crainic, N., Lelea, D.,  Aspecte privind dirijarea fenomenului de transfer termic la procesele de solificare în formele metalice,  Turnarea și Solidificarea  Metalelor și Aliajelor, Tome 1, nr.1, 1998, Editura U.T. Pres. ISSN 1453-9756, pp. 143-148.
[84] Ruddle, R.W., The Running and Casting of sand castings, Int. Metals Monogr., 19, 1956.
[85] Sahm, P.R., Hansen, P.N., Numerical Simulation and Modelling of Casting and Solidification Processes for Foundry and Cast-House, 1984, CIATF.
[86] Schaefers, W., CAD/CAM  in the Foundry, Workshop 52 th Int. Foundry Congress 1985, Melbourne, CIATF.
[87] Scheil, E.,  Bemerkungen zur Schichtkristallbildung, Zeitschrift fur Metallkunde, 14, 1942, p. 70.
[88] Scheil, E., Metallforsch, 1947, no.2: 69.
[89] Schwartz C., Mathematics of Solidification Processes in the Casting of Metals,  Zeitschrift fur angewandte Mathematik und Mechanik, 13, 1933, p 202.
[90] Sciama, G.,  Contribution a l’etude methematique du refroidissement de pieces de forme simple coulees en moule de sable et en moule metalliques avec resistence thermique de contact.  Fonderie, 268, 1968, p. 267.
[91] Sciama, G.,  Etude experimentale de la valadite d’hypothese classiques, en transmision de la chaleur, Revue de metallurgie, novembre 1966, p. 889.
[92] Shiestel, R., Modelisation et simulation d’ecoulements turbulents, Traite des Nouvelles Technologies, serie Mecanique, Editions Hermes, 1993.
[93] Shih, T/H., Lion, W.W., Shabbir, A., Yang, Z., Zhu, J., A new k-ε eddy viscosity model for high Reynolds number turbulent flows. Computers Fluids, Vol. 24, no. 3, 1995, pp. 227-238.
[94] Smelser, R.E., Richmond, O.,  Constitutive model effects on stresses and deformations in a solidiying cylinder, Proc. 4 th Conf. On Modelling of casting and Welding Processes, TMS, 1988.
[95] Soporan, V., Constantinescu, V., Modelarea la nivel macrostructural a solidificării aliajelor, Editura Dacia, Cluj-Napoca, 1995.
[96]Soporan, V., Analiza termică a construcției piesei turnate prin utilizarea metodelor numerice, Construcția de mașini, nr. 4-5, 1996, pp. 27-29.
[97] Soporan V., Classification and evaluation system for models and methods specific to solidification process analysis.  Metals Abstracts, volume 28, 1995, 51-0468, p. 157, The Materials Information Society, ISSN 0026-0924.
[98] Soporan, V., Considerații asupra metodelor de determinare a câmpului de  temperatură în sistemul aliaj-formă în timpul procesului de solidificare a pieselor turnate.  Buletinul științific al I.P.C-N., seria Chimie-Metalurgie, 31-32, 1988-1989, pp. 82-90.
[99] Soporan, V., Considerații asupra metodologiei de abordare a modelării procesului de solidificare a pieselor turnate, Metalurgia, tone 50, nr. 4, 1998, ISSN 0461-9579, pp. 49-67.
[100] Soporan, V., Consideation sur les methodes de determination du temps de solidification des pieces coulees, 52-emes Journees d’Etudes de la Fonderie, Nantes, 1992, Mem. B2.1, pp. 1-41.
[101] Soporan, V., Constantinescu, V., Crișan, M., Solidificarea aliajelor-preliminarii teoretice, Editura Transilvania Press, Cluj-Napoca, 1995, ISBN-973-97041-1-5.
[102] Soporann, V., Constantinescu, V., Lungu, F., Analysis and Estimative System on Specific Models of Solidification Process of Castings (part.I), Solidification of Metals and Alloys, Polish Academy of Science, 19, 1994, pp. 121-129.
[103] Soporan, V., Constantinescu, V., Lungu, F., Analysis and Estimative System on Specific Models of Solidification Process of Castings (part.II), Solidification on Metals and Alloys, Polish Academy of Science, 19, 1994, pp. 131-140.
[104] Soporan, V., Contribuții la simularea procesului de transfer termic prezent la turnarea pieselor în forme metalice. Buletinul  științific al I.P.C./N., Seria Chimie-Metalurgie, 33, 1990, pag. 23-39.
[105] Soporan, V., Contribuții privind modelarea solidificării macrostructurale a pieselor turnate, Buletinul științific al I.P.C.N.-, seria Chimie-Metalurgie, 31-32, 1988-1989, pag. 73-81.
[106] Soporan, V., Contributions to solidification modelling for die casting,  Metals abstracts, volume 29, number 9, September 1996, The Institute of Materials, ASM International, Publisched by Cambridge Scientific Abstracts, ISSN 0026-0924, p. 156.
[107] Soporan, V.,  Etude par l’ordinateur des facteurs perturbateurs du processus de  solidification des pieces couleees, Procedings First International Conference on Materials and Manufacturing Technologies, MATEHN’94, Cluj-Napoca, mai, 1994, pp. 497-502.
[108] Soporan, V., Evenimente actuale în domeniul modelării numerice a procesului de solidificare, Metalurgia, tone 51, nr. 8, 1999, p. 70-73, ISSN 0461-9579.
[109] Soporan, V., Implicații manageriale privind utilizarea sistemelor de proiectare asistată de calculator producției de piese turnate,  Metalurgia (48(, 1, 1996, pag. 67-70, CZ:621, ISSN 04161-9576.
[110] Soporan, V., Lungu, F., Some aspects concerning at the physical-mathematical simulation of the thermal specific phenomenos by the solidification process of casting pieces, Proceedings of the 11 th International Conference of Process Control and Simulation, September 19-20, 1994, SSAKI, Kosice, 1994, p. 402-407.
[111] Soporan, V., Lungu, F., Thermal analysis by numerical methods for casting construction a possible variant of preventive tests of materials, Metals abstracts, volume 29, number 7, July 1996, The Institute of Materials ASM International, Publisched by Cambridge Scientific Abstracts, ISSN 0026-0924, p. 201.
[112] Soporan, V., Modelarea la nivel macrostructural a solidificării aliajelor, Texă de doctorat, Universitatea Tehnică din Cluj-Napoca, 1993.
[113] Soporan, V., Pavai, C., Vamoș, C., Lungu, F., Crișan, M., The Modelling of Hydraulic and Thermic Phenomena Specific of  casting Alloys,  Proceedings of the 12 th International Conference on Process Control and Simulation, ASRPT-96, Volume I, ISBN 80-7099-263-8, September 10-13, 1996, SSAKI, Kosice, 1996, p. 169-176.
[114] Soporan, V., Pavai, C., Vamoș, C., Modelarea numerică a turnării oțelurilor în lingotieră în vederea optimizării parametrilor tehnolgici,  Metalurgia (48), 11, 1996, ISSN 046109579.
[115] Soporan, V., Repere istorice în modelarea numerică a procesului de solificiare, Metalurgia, tome 51, nr. 7, 1999, p. 42-45, ISSN 0461-9579.
[116] Soporan, V., Sistem de clasificare și de apreciere a modelelor de rezolvare specifice analizei procesului de solidificare,  Metalurgia, 46, 9, 1994, p. 42-48, CZ:621.776.01.
[117] Soporan, V., Sisteme de proiectare a pieselor turnate, Editura Dacia, Cluj-Napoca, 1996, ISBN 973-35-0589-7.
[118] Soporan, V., Stadiul actual al modelării prin metode numerice a procesului de solidificare a pieselor turnate,  Metalurgia, 46, 9, 1994, p. 20-23, CZ:621.74.04.
[119] Soporan, V., State of art of computer modelling of solidification processes, Metals Abstracts, volume 28, 1995, 51-0343, p. 146, The Materiale Information  Society, ISSN 0026-0294.
[120] Soporan, V., Thermal analysis by numerical methods for casting construction – a possible variant of preventive tests of materials,  EUROMAT’94, Hungarian Mining and Metallurgical Society, 1994.
[121] Soporan, V., Utilisation des ordinateurs dans l’analyse thermique pendant la solidification des pieces coulles (part I), Buletinul Institutului  Politehnic Iași, Tomul XL (XLIV), Fasc. 3-4, secția IX, Știința  și Ingineria Materialelor, p. 652-659.
[122] Soporan, V., Utilisation des ordinateurs dans ș’analise thermique pendant la solidification des pieces coulles (part. II), Buletinul Institutului  Politehnic Iași, Tomul XL (XLIV), Fasc. 3-4, secția IX, Știința  și Ingineria Materialelor, p. 660-665.
[123] Soporan, V., Vamoș, C., Pavai, C., Numerical Simulation of the Shrinkage due to the Mass Density Increase during Gray Cast Iron Solidification, Paper no.9, Sixth International Symporium on the Science and Processing of Cast Iron, 30 September-2 October 1998, Perdido Beach Resort, Orange Beach, alabama, USA.
[124] Soporan, V.,Vamoș, C., Pavai, C., Cercetări privind optimizarea și conducerea proceselor care au loc la obținerea pieselor turnate prin utilizarea modelării numerice, Raport cercetare, tema 4, cod CNCSIS 149, MEN, Universitatea Tehnică din Cluj-Napoca, Laboratorul de solidificarea aliajelor, 1999.
[125] Soporan, V., Vamoș, C., Pavai, C., Modelarea numerică cu rezoluție redusă a procesului de solidificare a pieselor de mari dimensiuni, În Revista de Turnătorie, tome 3, nr. 1998, ISSN 1224-21-44, p. 7-11
[126] Soporan, V., Vamoș, C., Pavai, C., Numerical modeling of the cavities during the alloys solidification, Metalurgia, English version, Vol. III (1998), no. 4, p. 53-55, Quaterly, ISSN 0461-9579.
[127] Soporan, V., Vamoș, C., Pavai, C.,  Numerical modeling of the stell casting in the mold, eith the aim of the optimization of the technological parameter, Metals Abstracts, volume 30, 1998, 51-0240, p. 183, The Materials Information Society, ISSN 0026-0924.
[128] Soporan, V., Vamoș, C., Pavai, C., Numerical simulation for technological interpretation of solidification process castings,  Metalurgia, English version, Vol. III (1998), no. 4, p. 56-60, Quanterly, ISSN 0461-9579.
[129] Soporan, V., Vamoș, C., Pavai, C., Numerical simulation of the shrinkage due to the mass density increase during grey  cast iron solidification, ANKIROS FOUNDRY CONGRESS-International Congress for Foundry Technology and Management, Istambul, Turcia, 14-16 October 1999.
[130] Soporan, V., Vamoș, C., Pavai, Optimizarea tehnologică și constructivă a pieselor tip batiu prin intermediul metodelor numerice, Metalurgia, tome 50, nr. 2, 1998, ISSN 0461-9579, p. 43-51.
[131] Soporan, V., Vamoș, C., Pavai, C., Simularea numerică a procesului de contracție și de formare a retasurilor în  timpul procesului de solidificare, În Turnarea și Solidificarea Metalelor și Aliajelor, tome 1, nr. 1, 1998, Editura U.T. Pres, p. 163-166, ISSN 1453-9756.
[132] Soporan, V., Vamoș, C., Pavai, C., Studiul calitativ asupra funcționării modelului numeric al solidificării cu verificarea formării retasurii,  Metalurgia, tome 50, nr. 1, 1998, p. 27-31, ISSN 0461-9579.
[133] Soporan, V., Vamoș, C., Pavai, C.,  The Constructive and Technological Optimization of casting by Means of the Solidification Direction Graph, Paper no. 10, Sixth International Symposium on the Science and Processing of Cast Iron, 30 September-2 October 1998, Perdido Beach Resort, Orange Beach, Alabama, USA.
[134] Soporan, V., Vamoș, C., Pavai, C., Utilizarea curbelor direcțiilor de solidificare pentru determinarea poziției optime de turnare a pieselor, În Turnarea și Solidificarea Metalelor și Aliajelor, tome 1, nr. 1, 1998, Editura U.T.Press, p. 167-172, ISSN 1453-9756.
[135]  Soporan, V., Vamoș, C., Pavai, C., Influența curgerii aliajului în timpul umplerii cavității asupra procesului de solidificare,  Metalurgia, tome 51, nr. 4, 1999, ISSN 0461-9579.
[136] Stefănescu, D.M., (editor),Metals Handbook, volume 15 , Casting, ASM International, Metals Park, Ohio, 1988.
[137] Stefănescu, D.M.,  Sixth International Symposium on the Science and Processing of Cast Iron, Extended Abstracts, 30 September- 2 October 1998,  Perdido Beach Resort, Orange Beach, Alabama, USA.
[138] Stepanov, A.E., Kirillova, L.G.,  Matematiceskoe modelirovanie proțesov vîrașivania cristaliceskih poli-provodnikovîh, Kiev Noukova Dumka, 1988.
[139] Thevoz, P., Modelisation de solidification dentritique equaixe, These Nr. 765, Ecole Polytechnique Federale de Lausanna, 1988.
[140] Thomas, B.G., Beckermann, C., (eds.), Modeling of Casting, Welding and Advanced Solidification Processes – VIII, San Diego, California, June 7-12, 1998, A Publication of TMS, Printed in USA.
[141] Thoams, B.G.,  Stress Modeling of Casting Processess: on Overiview, Modeling of Casting, Welding and Advanced Solidification Processes VI, Palm Coast, FL, March 21-26, 1993.
[142] Tszeng, T.C., Kobayashi, S.,  Stress analysis in solidification processes: application to continuous casting,  Int. J. Mach. Tools Manufact., Vol. 29, 1989, p. 121-140.
[143] Vamoș, C., Pavai, C., Soporan, V.,  Numerical modeling of casting  process, Rev. Anal. Numer. Theorie Approximations (25), 1-2, 1996, p. 247-255, ISSN 1222-9024, Editura Academiei, București.
[144]  Vannier, I., Modelisation de la solidification des lingots d’acier, Institut National Polytechnique de Lorraine, 1995.
[145] Vicente-Hernandez, Vers une approache thermomecanique du procede  de fonderie: caracterisation rheologique et microstructural d’alliage metalliques a l’etat semi-solid,  These de doctorat, ENSMP, 1994.
[146] Wener, J.H., Boley, B.A., Elasto-plastic thermal stress in a solidifying body, J. Mech. Phys. Solids, Vol. 11, p. 145-154.
[147] Wiese, J.W.,  Dantzing, A.,  Modeling stress developments during the solidification of grav iron castings,  Met. Trans. A, Vol. 21A, p. 489-497.
[148] Zabaras, N., Ruan, Y, Richmond, O.,  Front tracking thermomechanical model for hypoelastic-viscoplstic behavioir in a solidifying body, Comp. Meth. Appl. Mech. Engng., Vol. 81, p. 333-364.
[149] Zhang, J.Y., Usmani, A.S., Lewis, R.W.,  A realistic coupled thermo-mechanical finite element model of casting systems,  Proc. 3 rd World Conf. On Computational Mechanics (WCCM III), Chiba, Japan, 1994.
[150] Zlamar, M.,  Finite for non liniar parabolic equations, Rairo Num. Analysis, Vol. 11, No. 1, 1977, p. 93-107.
[151] Zou, J., Simulation de la solidification eutectique equiaxe, These No. 774, Ecole Polytechnique Federale de Lausanne, 1988.